The MIS-D screw holes have an M4 thread and are are typically 10 mm deep. Appropriate fasteners (typically ~10 mm long) are often supplied with the mount rather than the display, but they are also easily available from many hardware stores.

The FDMI was extended in 2006 with a collection of additional screw patterns that are more appropriate for larger TV screens.

MIS-D 75	75 mm × 75 mm
MIS-D 100	100 mm × 100 mm
MIS-E	200 mm × 100 mm
MIS-F	200 mm × 200 mm 400 mm × 400 mm 600 mm × 200 mm 600 mm × 400 mm 800 mm × 400 mm 280 mm x 150 mm

Examples of the full identification of a particular FDMI variant look like

VESA MIS-D, 100, C

VESA MIS-F, 200, 200, 6

where

• the letter after MIS- identifies the part of the standard used, e.g.
  • part B, C, D, E for flat displays with 10–78 cm diagonal
  • part F for flat displays with 79–230 cm diagonal
• for part D, a number identifies the 75 mm and 100 mm variants (100 or 75),
• for part F, a number pair identifies the maximum width and height of the mounting-hole pattern,
• for parts B–E, a final letter identifies the interface location on the flat display as center (C), top (T), bottom (B), left (L), right (R), top and bottom (T/B), or left and right (L/R),
• for part F, a final digit distinguishes between 10 mm deep M6 mounting holes (6) and 15 mm deep M8 holes (8).